APS62D-ER11-60Z/1.8KW
Keyword:
APS62D-ER11-60Z/1.8KW
Picture and text details
Spindle Parameters
| Name | Unit | Parameter value | Note |
| Conical Surface Runout | mm | ≤0.001 | / |
| Static Yaw | mm | ≤0.006 | At 30 mm from the standard bar |
| Vibration value | mm/s | ≤0.8 | / |
| Spindle cooling demand flow rate | L/Min | ≥1.5 | / |
| Coolant temperature | °C | Room temperature: -3°C | The coolant's maximum temperature must not exceed 32°C. |
| Cooling system pressure | MPa | 0.2–0.5 | / |
| Cooling mechanism cooling capacity | kW | ≥0.75 | / |
| Noise level | DB/(A) | ≤75 | / |
| Spindle gas seal air pressure | MPa | 0.3–0.4 | / |
| Tool interface | / | ER11 | / |
| Static Draft Force | N | / | / |
| Tool holder overtravel for tool change | mm | / | / |
| Machete Air Pressure | MPa | / | / |
| Oil requirement for the machete | cm² | / | / |
| Return (Clamp) Knife - Pneumatic | MPa | / | / |
| Motor weight | kg | 3.8 | / |
| Bearing model | / | First, 7003 × 2; then, 7003 × 1 | / |
| Bearing Precision Grades | / | Level P4, rotational accuracy Level P2 | / |
| Lubrication method | / | Oils and fats | / |
| Signal Type | / | / | / |
| Work environment temperature | / | <40 | / |
| Central water outlet function | °C | None | / |
| Cooling medium | / | / | / |
| Maximum temperature of the cooling liquid | °C | / | / |
| Center outlet water usage pressure | MPa | / | / |
| Filtration accuracy | µm | / | / |
| Central outlet water flow | L/Min | / | / |
Note:
1: Mounting method: Clamp;
2: Before welding the aviation connector, carefully slide an appropriate length of protective heat shrink tubing or wax-coated sleeve over the wire to safeguard the exposed end.
External dimensions
Spindle Motor Parameters
| Name | Parameter value | Unit | Note |
| Motor Type | Induction Asynchronous Motor | / | Y-Connection |
| Rated power | 1. 8(S1) | kW | / |
| Rated current | 6.3 (S1) / 9.3 (S6) | A | / |
| Rated speed | 60000 | RPM | / |
| Rated frequency | 1000 | Hz | / |
| Rated Torque | 0.28(S1) / 0.35(S6) | N.m | / |
| Voltage | 200 | VAC | / |
| Maximum rotational speed | 60000 | RPM | / |
| Maximum frequency | 1000 | Hz | / |
| Encoder Type | / | / | / |
| Encoder resolution | / | p/rev | / |
| Motor Temperature Alarm Limit | 80 | °C | / |
| Number of pole pairs | 1 | / | / |
| Cooling method | IC3W7 | / | / |
| Protection Level | IP67 | / | / |
| Motor insulation class | H-Class | / | / |
Performance Curve
